filter
Show all products (79)
Ebony wood handle (1)
Death Adder™ - by Down Under Knives
With the power and chopping ability pretty well covered by the Outback™ and Red Rock Raptor™, we turned our attention to speed. We set out to create the flat out fastest and best handling fighting knife we could come up with, with just the right balance and reach to compromise nothing. The result is the new Death Adder™ - like its reptilian namesake, capable of delivering a devastating strike in the blink of an eye. The Australian Death Adder can strike, deliver its venom and go back to strike position in 0.15 seconds, and with this dagger a properly trained knife fighter won't be far behind. The full tang 440C construction and uniquely contoured solid ebony grip makes the Death Adder™ exceptionally strong and easy to handle in either hand, in any position. We consulted martial arts experts and hunters to find just the right blade dimensions to reach what needs to be reached with no sacrifices in speed and agility. The genuine leather scabbard is also thick and rigid enough to guarantee the blade can be accessed instantly without binding or snagging. Just like with the Bush Dagger™, the securing strap comes off in the same fluid motion you use to grab the dagger, and the positioning of the belt loop guarantees the scabbard will not flex or follow. Overall length 27 cm - 10 1/2" , blade length 15 cm - 6", blade thickness 5,5 mm - .2", weight 274 g / 9.66 oz
With the power and chopping ability pretty well covered by the Outback™ and Red Rock Raptor™, we turned our attention to speed. We set out to create the flat out fastest and best handling fighting knife we could come up with, with just the right balance and reach to compromise nothing. The result is the new Death Adder™ - like its reptilian namesake, capable of delivering a devastating strike in the blink of an eye. The Australian Death Adder can strike, deliver its venom and go back to strike position in 0.15 seconds, and with this dagger a properly trained knife fighter won't be far behind. The full tang 440C construction and uniquely contoured solid ebony grip makes the Death Adder™ exceptionally strong and easy to handle in either hand, in any position. We consulted martial arts experts and hunters to find just the right blade dimensions to reach what needs to be reached with no sacrifices in speed and agility. The genuine leather scabbard is also thick and rigid enough to guarantee the blade can be accessed instantly without binding or snagging. Just like with the Bush Dagger™, the securing strap comes off in the same fluid motion you use to grab the dagger, and the positioning of the belt loop guarantees the scabbard will not flex or follow. Overall length 27 cm - 10 1/2" , blade length 15 cm - 6", blade thickness 5,5 mm - .2", weight 274 g / 9.66 oz
...
149,00 EUR*
Zero Tolerance Model 0350 TS
VIDEO on ZERO TOLERANCE knives (click here!) Zero Tolerance 0350TS. Blade of S30V stainless steel with Tungsten DLC Tiger-stripe camouflage coating. SpeedSafe® quick-opening, frame lock. Blade length 3 1/4”, thickness .121”. Weight 5.6 oz. (159 g). The Zero Tolerance knife range is adjusted to the high demands of police, military, rescue and special forces.
VIDEO on ZERO TOLERANCE knives (click here!) Zero Tolerance 0350TS. Blade of S30V stainless steel with Tungsten DLC Tiger-stripe camouflage coating. SpeedSafe® quick-opening, frame lock. Blade length 3 1/4”, thickness .121”. Weight 5.6 oz. (159 g). The Zero Tolerance knife range is adjusted to the high demands of police, military, rescue and special forces.
...
199,00 EUR*
Zero Tolerance Model 0350 TS-ST
VIDEO on ZERO TOLERANCE knives (click here!) Zero Tolerance 0350TS. Part-serrated blade of S30V stainless steel with Tungsten DLC Tiger-stripe camouflage coating. SpeedSafe® quick-opening, frame lock. Blade length 3 1/4”, thickness .121”. Weight 5.6 oz. (159 g). The Zero Tolerance knife range is adjusted to the high demands of police, military, rescue and special forces.
VIDEO on ZERO TOLERANCE knives (click here!) Zero Tolerance 0350TS. Part-serrated blade of S30V stainless steel with Tungsten DLC Tiger-stripe camouflage coating. SpeedSafe® quick-opening, frame lock. Blade length 3 1/4”, thickness .121”. Weight 5.6 oz. (159 g). The Zero Tolerance knife range is adjusted to the high demands of police, military, rescue and special forces.
...
199,00 EUR*
Bulltec 500 MAX
Electric impulse defender. 500 mA, powered by 1x 9 V battery (battery not included). CE-certified, PTB E 001-12
Electric impulse defender. 500 mA, powered by 1x 9 V battery (battery not included). CE-certified, PTB E 001-12
...
69,90 EUR*
Cuticle Scissors - made by Pomoni, Italy
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
14,95 EUR*
Cuticle Scissors - made by Pomoni, Italy
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
14,95 EUR*
Cuticle Scissors - made by Pomoni, Italy
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
14,95 EUR*
Cuticle Scissors - made by Pomoni, Italy
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged cuticle scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
14,95 EUR*
Nail Scissors - made by Pomoni, Italy
Drop-forged nail scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged nail scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
14,95 EUR*
Nail Scissors - made by Pomoni, Italy
Drop-forged nail scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged nail scissors, nickel plated. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
15,95 EUR*
Nail Scissors with micro-serration - made by Pomoni, Italy
Drop-forged nail scissors, nickel plated, with micro-serration. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged nail scissors, nickel plated, with micro-serration. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
14,95 EUR*
Nail Scissors with micro-serration - made by Pomoni, Italy
Drop-forged heavy nail scissors, nickel plated, with micro-serration. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged heavy nail scissors, nickel plated, with micro-serration. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
15,95 EUR*
Nose Scissors - made by Pomoni, Italy
Drop-forged nose scissors, nickel plated. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged nose scissors, nickel plated. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
15,95 EUR*
Classic Emboidery Scissors - made by Pomoni, Italy
Drop-forged classic emboidery scissors, nickel plated. Gold-plated handle. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged classic emboidery scissors, nickel plated. Gold-plated handle. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
16,50 EUR*
Embroidery Scissors - made by Pomoni, Italy
Drop-forged embroidery scissors, nickel plated. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged embroidery scissors, nickel plated. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
15,95 EUR*
Classic Emboidery Scissors - made by Pomoni, Italy
Drop-forged classic emboidery scissors, nickel plated. Stork gold plated, wing nickel plated. 4-1/4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged classic emboidery scissors, nickel plated. Stork gold plated, wing nickel plated. 4-1/4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
17,95 EUR*
Pocket Scissors - made by Pomoni, Italy
Drop-forged pocket scissors, nickel plated. 5” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged pocket scissors, nickel plated. 5” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
18,90 EUR*
Household Scissors - made by Pomoni, Italy
Drop-forged household scissors, nickel plated. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged household scissors, nickel plated. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
from 21,95 EUR*
Household Scissors with micro-serration - made by Pomoni, Italy
Drop-forged household scissors, nickel plated, with micro-serration. Red lacquered handle. 7” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged household scissors, nickel plated, with micro-serration. Red lacquered handle. 7” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
25,95 EUR*
Household Scissors - made by Pomoni, Italy
Drop-forged household scissors, nickel plated. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Drop-forged household scissors, nickel plated. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
from 16,95 EUR*
Cuticle Scissors - made by Pomoni, Italy
Stainless drop-forged cuticle scissors. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged cuticle scissors. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
20,95 EUR*
Cuticle Scissors - made by Pomoni, Italy
Stainless drop-forged cuticle scissors. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged cuticle scissors. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
21,95 EUR*
Nail Scissors with micro-serration - made by Pomoni, Italy
Stainless drop-forged nail scissors, with micro-serration. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged nail scissors, with micro-serration. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
20,95 EUR*
Nail Scissors - made by Pomoni, Italy
Stainless drop-forged nail scissors. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged nail scissors. 3-1/2” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
21,95 EUR*
Nail Scissors with micro-serration - made by Pomoni, Italy
Stainless drop-forged heavy nail scissors, with micro-serration. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged heavy nail scissors, with micro-serration. 4” overall. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
22,95 EUR*
Household Scissors - made by Pomoni, Italy
Stainless drop-forged household scissors. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged household scissors. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
31,50 EUR*
Household Scissors - made by Pomoni, Italy
Stainless drop-forged household scissors. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
Stainless drop-forged household scissors. F.lli Pomoni is a traditional italian manufacturer, located in the Premana community, Lombardy (north Italy). Especially within Italy Premana is well renowned for the very high quality standard of scissors production.
...
39,50 EUR*
Linder PUCK
Small multi-purpose knife that even fits in your coat pocket. Stainless 440A sand-blasted blade, G-10 handle. Comes in Kydex sheath. Blade length 6.6 cm, overall 15.3 cm, handle 8.7 cm, weight 74 g.
Small multi-purpose knife that even fits in your coat pocket. Stainless 440A sand-blasted blade, G-10 handle. Comes in Kydex sheath. Blade length 6.6 cm, overall 15.3 cm, handle 8.7 cm, weight 74 g.
...
66,00 EUR*
Linder PUCK 2
Small multi-purpose knife that even fits in your coat pocket. Stainless 440A blade with Kalgard coating, G-10 handle. Comes in Kydex sheath. Blade length 6.6 cm, overall 15.3 cm, handle 8.7 cm, weight 74 g.
Small multi-purpose knife that even fits in your coat pocket. Stainless 440A blade with Kalgard coating, G-10 handle. Comes in Kydex sheath. Blade length 6.6 cm, overall 15.3 cm, handle 8.7 cm, weight 74 g.
...
69,00 EUR*
Linder MISSION.G
Combat knife with stainless blade of Kalgard-coated 420 steel. Green pakka wood handle, leather sheath. Blade length 17 cm, overall 28.3 cm, handle 11.3 cm, weight 228 g.
Combat knife with stainless blade of Kalgard-coated 420 steel. Green pakka wood handle, leather sheath. Blade length 17 cm, overall 28.3 cm, handle 11.3 cm, weight 228 g.
...
99,00 EUR*
Linder MISSION.S
Combat knife with stainless blade of Kalgard-coated 420 steel. Black pakka wood handle, leather sheath. Blade length 17 cm, overall 28.3 cm, handle 11.3 cm, weight 228 g.
Combat knife with stainless blade of Kalgard-coated 420 steel. Black pakka wood handle, leather sheath. Blade length 17 cm, overall 28.3 cm, handle 11.3 cm, weight 228 g.
...
99,00 EUR*
Linder COMBAT.S
Large classic dagger with drop-forged blade of Kalgard-coated 420 stainless steel. Plastic handle with metal fittings, leather sheath. Blade length 21,7 cm, overall 34.5 cm, handle 12.8 cm, weight 194 g.
Large classic dagger with drop-forged blade of Kalgard-coated 420 stainless steel. Plastic handle with metal fittings, leather sheath. Blade length 21,7 cm, overall 34.5 cm, handle 12.8 cm, weight 194 g.
...
154,00 EUR*
Linder GUIDE
As tough as it looks: the Linder Guide with blasted 420 stainless steel blade and black micarta handle. Leather sheath. Blade 14.0 cm, overall 26.0 cm, handle 12.0 cm, weight 266 g.
As tough as it looks: the Linder Guide with blasted 420 stainless steel blade and black micarta handle. Leather sheath. Blade 14.0 cm, overall 26.0 cm, handle 12.0 cm, weight 266 g.
...
42,00 EUR*
Linder SQUAD
Deployment knife with 420 stainless steel blade and G-10 handle. Leather sheath. Blade length 13.0 cm, overall 25.0 cm, handle 12.0 cm, weight 210 g.
Deployment knife with 420 stainless steel blade and G-10 handle. Leather sheath. Blade length 13.0 cm, overall 25.0 cm, handle 12.0 cm, weight 210 g.
...
52,00 EUR*
Linder ELK
Perfectly balanced belt knife with 4” blade made of 420 stainless steel. Real stag / pakka wood handle. In firm leather sheath.
Perfectly balanced belt knife with 4” blade made of 420 stainless steel. Real stag / pakka wood handle. In firm leather sheath.
...
59,00 EUR*
Linder BULLET
Rugged belt knife with blade made of 420 stainless steel. Rosewood handle, leather sheath. Blade length 14,0 cm, overall 26.0 cm, handle 12.0 cm, weight 230 g.
Rugged belt knife with blade made of 420 stainless steel. Rosewood handle, leather sheath. Blade length 14,0 cm, overall 26.0 cm, handle 12.0 cm, weight 230 g.
...
42,50 EUR*
Linder Thrower 1
Solingen made throwing knife in 1980s style. C60 carbon steel blade. Riveted rosewood handle. Textile sheath. Blade length 10,5 cm, overall 19.5 cm, handle 9.0 cm, weight 50 g.
Solingen made throwing knife in 1980s style. C60 carbon steel blade. Riveted rosewood handle. Textile sheath. Blade length 10,5 cm, overall 19.5 cm, handle 9.0 cm, weight 50 g.
...
19,00 EUR*
Linder Thrower 2
Solingen made throwing knife in 1980s style. C60 carbon steel blade. Riveted leather handle. Textile sheath. Blade length 14,0 cm, overall 25.5 cm, handle 11.5 cm, weight 84 g.
Solingen made throwing knife in 1980s style. C60 carbon steel blade. Riveted leather handle. Textile sheath. Blade length 14,0 cm, overall 25.5 cm, handle 11.5 cm, weight 84 g.
...
18,50 EUR*
LensOlux HL 150 Head Lamp
This LENSOLUX headlamp mod. HL 150 is a high performance LED-lamp operating with 3xAAA batteries only. Lumen: about 150. Switching: 30% - 100% - flash - OFF. Lamphead: aluminium black. Swingable headbrace: flexibel and adjustable. Focus: telescope zoom. Weight: 170 g.
This LENSOLUX headlamp mod. HL 150 is a high performance LED-lamp operating with 3xAAA batteries only. Lumen: about 150. Switching: 30% - 100% - flash - OFF. Lamphead: aluminium black. Swingable headbrace: flexibel and adjustable. Focus: telescope zoom. Weight: 170 g.
...
39,90 EUR*
LensOlux TL 150Z Flashlight
Mod. TL 150 Z is operating with the latest LED-technology and starts at the beginning with 150 lumen! It needs only one easy-to-get AA battery. This is very important because the follow-up costs are as low as possible! Operating hours up to 15 hours. Material: aluminium, black. Total length about 3,7”. This makes it very handy. Price includes two batteries and gift box.
Mod. TL 150 Z is operating with the latest LED-technology and starts at the beginning with 150 lumen! It needs only one easy-to-get AA battery. This is very important because the follow-up costs are as low as possible! Operating hours up to 15 hours. Material: aluminium, black. Total length about 3,7”. This makes it very handy. Price includes two batteries and gift box.
...
39,90 EUR*
Nylon pouch
Best price nylon pouch. With belt loop and two press-buttons for more flexibility since the pouch fits various knife sizes. Inner dimensions: Length 98 mm while using the lower press-button, length 107 mm while using the upper press-button. Width 32 mm. Height 18 mm.
Best price nylon pouch. With belt loop and two press-buttons for more flexibility since the pouch fits various knife sizes. Inner dimensions: Length 98 mm while using the lower press-button, length 107 mm while using the upper press-button. Width 32 mm. Height 18 mm.
...
2,90 EUR*
Taidea Multi-Function Sharpener
Carbides provide quick edge setting, and the specially shaped ceramic stones are designed to give you a razor sharp edge on either standard or serrated edges. A fold out, tapered-round, diamond coated rod is designed for sharpening serrated as well as standard edges. Unit is compact, lightweight, durable, and comes with a lanyard hole. Length of sharpening rod 8.3 cm, total length 20.9 cm, length closed 12.8 cm, weight 42 g.
Carbides provide quick edge setting, and the specially shaped ceramic stones are designed to give you a razor sharp edge on either standard or serrated edges. A fold out, tapered-round, diamond coated rod is designed for sharpening serrated as well as standard edges. Unit is compact, lightweight, durable, and comes with a lanyard hole. Length of sharpening rod 8.3 cm, total length 20.9 cm, length closed 12.8 cm, weight 42 g.
...
14,50 EUR*
Taidea Ceramic Knife Sharpener
This sharpener was mainly designed for knives with ceramic blades but is also suitable for steel blade knives. Its double-sided diamond surfaces come in 600 grit (coarse) and 1000 grit (fine). The plastic holder is shaped to hold the knife firm and in correct angle. Sharpening pad 72 x 24 mm, total length 19 cm, length handle 11,5 cm, weight 60 g.
This sharpener was mainly designed for knives with ceramic blades but is also suitable for steel blade knives. Its double-sided diamond surfaces come in 600 grit (coarse) and 1000 grit (fine). The plastic holder is shaped to hold the knife firm and in correct angle. Sharpening pad 72 x 24 mm, total length 19 cm, length handle 11,5 cm, weight 60 g.
...
16,50 EUR*
Linder Secret Service
Rather heavy and rugged lock back with textured green G-10 handle. 420 stainless steel blade. With clip. Blade length 8.0 cm, overall 18.3 cm, closed 10.3 cm, weight 180 g.
Rather heavy and rugged lock back with textured green G-10 handle. 420 stainless steel blade. With clip. Blade length 8.0 cm, overall 18.3 cm, closed 10.3 cm, weight 180 g.
...
29,00 EUR*
Linder Boot Knife B. K. 10
Rugged belt / boot knife with stainless blade of Kalgard-coated 420 steel. Green pakka wood handle, kydex sheath. Blade length 10 cm, overall 20.4 cm, handle 10.4 cm, weight 128 g.
Rugged belt / boot knife with stainless blade of Kalgard-coated 420 steel. Green pakka wood handle, kydex sheath. Blade length 10 cm, overall 20.4 cm, handle 10.4 cm, weight 128 g.
...
89,90 EUR*
Linder Collapsible Spade
Collapsible spade, black. In black nylon pouch. Length unfolded 47 cm, folded 20 cm, weight 604 g. Bêche pliant, noir. Etui en nylon noir. Longueur déplié 47 cm, plié 20 cm, poids 604 g.
Collapsible spade, black. In black nylon pouch. Length unfolded 47 cm, folded 20 cm, weight 604 g. Bêche pliant, noir. Etui en nylon noir. Longueur déplié 47 cm, plié 20 cm, poids 604 g.
...
19,95 EUR*
Linder Collapsible Spade
Collapsible spade, black. In camouflage nylon pouch. Length unfolded 40 cm, folded 16,3 cm, weight 420 g.
Collapsible spade, black. In camouflage nylon pouch. Length unfolded 40 cm, folded 16,3 cm, weight 420 g.
...
15,90 EUR*
Linder Panda 1
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Liner Lock with belt clip. Blade length 8.3 cm, overall 20.0 cm, closed 11.5 cm, weight 112 g.
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Liner Lock with belt clip. Blade length 8.3 cm, overall 20.0 cm, closed 11.5 cm, weight 112 g.
...
25,50 EUR*
Linder Panda 2
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Liner Lock. Blade length 8.8 cm, overall 20.3 cm, closed 11.5 cm, weight 132 g.
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Liner Lock. Blade length 8.8 cm, overall 20.3 cm, closed 11.5 cm, weight 132 g.
...
25,50 EUR*
Linder Panda 3
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Liner Lock. Blade length 8.3 cm, overall 19.3 cm, closed 11.0 cm, weight 122 g.
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Liner Lock. Blade length 8.3 cm, overall 19.3 cm, closed 11.0 cm, weight 122 g.
...
25,50 EUR*
Linder Panda 4
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Lockback. Blade length 8.1 cm, overall 19.8 cm, closed 11.7 cm, weight 134 g.
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Lockback. Blade length 8.1 cm, overall 19.8 cm, closed 11.7 cm, weight 134 g.
...
29,90 EUR*
Linder Panda 5
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Belt or boot knife. Blade length 9.3 cm, overall 18.3 cm, handle 9.0 cm, weight 132 g.
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Belt or boot knife. Blade length 9.3 cm, overall 18.3 cm, handle 9.0 cm, weight 132 g.
...
35,00 EUR*
Linder Panda 6
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Sheath knife. Blade length 7.5 cm, overall 16.7 cm, handle 9.0 cm, weight 68 g.
Just like the renowned Panda bear this knife is reduced to the colours black and white. And this combination rocks! Blade made of black coated 420 stainless steel, handle made of black & white G-10. Sheath knife. Blade length 7.5 cm, overall 16.7 cm, handle 9.0 cm, weight 68 g.
...
32,90 EUR*
KnifeDAO Shark
High quality precision knife with liner-lock-system. 8Cr14MoV stainless steel blade. With G-10 handle.
High quality precision knife with liner-lock-system. 8Cr14MoV stainless steel blade. With G-10 handle.
...
from 29,00 EUR*
KnifeDAO Dorado
High quality precision knife with liner-lock-system. 8Cr14MoV stainless steel blade. With G-10 handle.
High quality precision knife with liner-lock-system. 8Cr14MoV stainless steel blade. With G-10 handle.
...
from 29,00 EUR*
Tekut Rocket D
The unique liner lock with black & blue G-10 handle. 7Cr17Mov stainless steel blade. With clip. Blade length 7.0 cm, overall 17.0 cm, closed 10.0 cm, weight 98 g.
The unique liner lock with black & blue G-10 handle. 7Cr17Mov stainless steel blade. With clip. Blade length 7.0 cm, overall 17.0 cm, closed 10.0 cm, weight 98 g.
...
24,50 EUR*
Tekut Rocket E
The unique liner lock with black & green G-10 handle. 7Cr17Mov stainless steel blade. With clip. Blade length 7.0 cm, overall 17.0 cm, closed 10.0 cm, weight 98 g.
The unique liner lock with black & green G-10 handle. 7Cr17Mov stainless steel blade. With clip. Blade length 7.0 cm, overall 17.0 cm, closed 10.0 cm, weight 98 g.
...
24,50 EUR*
Tekut Pengu
Rugged though elegant liner lock with textured blue anodized aluminum handle. A real lightweight with 7Cr17Mov stainless steel blade. With clip. Blade length 7.0 cm, overall 16.8 cm, closed 9.9 cm, weight 66 g.
Rugged though elegant liner lock with textured blue anodized aluminum handle. A real lightweight with 7Cr17Mov stainless steel blade. With clip. Blade length 7.0 cm, overall 16.8 cm, closed 9.9 cm, weight 66 g.
...
22,00 EUR*
Linder Chirpy
Small simpatico lock back with 420 stainless steel blade and belt clip. Textured rosewood handle. Blade 6.5 cm, overall 15.7 cm, closed 9.2 cm, weight 114 g.
Small simpatico lock back with 420 stainless steel blade and belt clip. Textured rosewood handle. Blade 6.5 cm, overall 15.7 cm, closed 9.2 cm, weight 114 g.
...
17,50 EUR*
Linder Spark
Nicely designed liner lock knife with G-10 handle. Satin finished 420 stainless steel blade. With clip. Blade length 9.5 cm, overall 21.0 cm, closed 11.8 cm, weight 138 g.
Nicely designed liner lock knife with G-10 handle. Satin finished 420 stainless steel blade. With clip. Blade length 9.5 cm, overall 21.0 cm, closed 11.8 cm, weight 138 g.
...
21,00 EUR*
Linder Gloom
Cuddly liner lock. Black 420 stainless blade and aluminum handle. With clip. Blade 6.0 cm, overall 15.3 cm, closed 9.0 cm, weight 116 g.
Cuddly liner lock. Black 420 stainless blade and aluminum handle. With clip. Blade 6.0 cm, overall 15.3 cm, closed 9.0 cm, weight 116 g.
...
17,90 EUR*
Linder Rover
Nicely designed liner lock knife with textured rosewood handle. Satin finished 420 stainless steel blade. Blade length 8.0 cm, overall 20.3 cm, closed 12.3 cm, weight 132 g.
Nicely designed liner lock knife with textured rosewood handle. Satin finished 420 stainless steel blade. Blade length 8.0 cm, overall 20.3 cm, closed 12.3 cm, weight 132 g.
...
19,50 EUR*
Linder Colibri
This beautiful frame lock knife comes in amazing colors. 420 stainless steel blade and handle titanium nitride coated, with bright orange G-10 scales. Blade length 8.9 cm, overall 20.8 cm, closed 11.9 cm, weight 142 g.
This beautiful frame lock knife comes in amazing colors. 420 stainless steel blade and handle titanium nitride coated, with bright orange G-10 scales. Blade length 8.9 cm, overall 20.8 cm, closed 11.9 cm, weight 142 g.
...
27,50 EUR*
Linder Fly 1
Light as a feather. Frame lock, black coated. 420 stainless blade, gold color aluminum front scale. With clip. Blade length 6.0 cm, overall 15.0 cm, closed 8.9 cm, weight 40 g.
Light as a feather. Frame lock, black coated. 420 stainless blade, gold color aluminum front scale. With clip. Blade length 6.0 cm, overall 15.0 cm, closed 8.9 cm, weight 40 g.
...
15,90 EUR*
Linder Fly 2
Light as a feather. Frame lock, blue anodized. 420 stainless blade, pink color aluminum front scale. With clip. Blade length 6.0 cm, overall 15.0 cm, closed 8.9 cm, weight 40 g.
Light as a feather. Frame lock, blue anodized. 420 stainless blade, pink color aluminum front scale. With clip. Blade length 6.0 cm, overall 15.0 cm, closed 8.9 cm, weight 40 g.
...
15,90 EUR*
Kershaw 1050 Folding Field
Kershaw’s flagship now affordable for everyone! Blade of mirror polished 8CR13MoV stainless steel. PMMA plastic scales. Comes in leather pouch. Blade length 3-1/8”. Closed length 4-3/4”. Weight 9 oz. (255 g).
Kershaw’s flagship now affordable for everyone! Blade of mirror polished 8CR13MoV stainless steel. PMMA plastic scales. Comes in leather pouch. Blade length 3-1/8”. Closed length 4-3/4”. Weight 9 oz. (255 g).
...
99,50 EUR*
Kershaw 1605 CLASH
The new Clash just may be a perfect EDC. It features a drop-point blade of 8CR13MoV stainless steel, which Kershaw heat-treats to ensure its strength, hardness, and ability to hold a keen edge. That’s paired with a lightweight Glass-filled nylon handle. To make it even better, the Clash features SpeedSafe® assisted opening, a Flipper, and is priced for excellent value. Blade of bead-blasted 8CR13MoV stainless steel. SpeedSafe® assisted opening. Glass-filled-nylon handle with clip. Blade length 3”. Closed length 4-1/4”. Overall length 7-1/4”. Weight 4 oz. (113 g).
The new Clash just may be a perfect EDC. It features a drop-point blade of 8CR13MoV stainless steel, which Kershaw heat-treats to ensure its strength, hardness, and ability to hold a keen edge. That’s paired with a lightweight Glass-filled nylon handle. To make it even better, the Clash features SpeedSafe® assisted opening, a Flipper, and is priced for excellent value. Blade of bead-blasted 8CR13MoV stainless steel. SpeedSafe® assisted opening. Glass-filled-nylon handle with clip. Blade length 3”. Closed length 4-1/4”. Overall length 7-1/4”. Weight 4 oz. (113 g).
...
46,50 EUR*
Kershaw 1780CB RAKE
The Rake is Kershaw’s newest composite-blade knife. It features tough, wear-resistant D2 on the cutting edge and high-performance Sandvik 14C28N on the spine. The extra-wide blade with its curved belly provides ample slicing and slashing capability. A clipped point preserves piercing power, too. SpeedSafe® assisted opening and a built-in Flipper make the Rake fast and easy to open. Designed by Tim Galyean.Composite-blade knife with CPM-D2 and Sandvik 14C28N steels. SpeedSafe® assisted opening. Textured G-10 handle with clip. Blade length 3-1/2”. Closed length 4-5/8”. Overall length 8-1/8”. Weight 4.8 oz. (136 g).
The Rake is Kershaw’s newest composite-blade knife. It features tough, wear-resistant D2 on the cutting edge and high-performance Sandvik 14C28N on the spine. The extra-wide blade with its curved belly provides ample slicing and slashing capability. A clipped point preserves piercing power, too. SpeedSafe® assisted opening and a built-in Flipper make the Rake fast and easy to open. Designed by Tim Galyean.Composite-blade knife with CPM-D2 and Sandvik 14C28N steels. SpeedSafe® assisted opening. Textured G-10 handle with clip. Blade length 3-1/2”. Closed length 4-5/8”. Overall length 8-1/8”. Weight 4.8 oz. (136 g).
...
159,00 EUR*
Kershaw 1930 ASSET
SpeedSafe® assisted opening, a lightweight and maneuverable trailing-point blade, and a value price will make the new Asset a real asset to your knife collection. The quality 8CR13MoV stainless-steel blade opens easily with the built-in flipper. The blade is heat-treated for high performance. It’s strong, hard, and takes and holds its edge extremely well. The Asset’s textured, glass-filled-nylon handle provides a secure grip every time.Blade of 8CR13MoV stainless steel. SpeedSafe® assisted opening. Glass-filled-nylon handle with clip. Blade length 3-1/4”. Closed length 4-5/8”. Overall length 7-7/8”. Weight 3.8 oz. (108 g).
SpeedSafe® assisted opening, a lightweight and maneuverable trailing-point blade, and a value price will make the new Asset a real asset to your knife collection. The quality 8CR13MoV stainless-steel blade opens easily with the built-in flipper. The blade is heat-treated for high performance. It’s strong, hard, and takes and holds its edge extremely well. The Asset’s textured, glass-filled-nylon handle provides a secure grip every time.Blade of 8CR13MoV stainless steel. SpeedSafe® assisted opening. Glass-filled-nylon handle with clip. Blade length 3-1/4”. Closed length 4-5/8”. Overall length 7-7/8”. Weight 3.8 oz. (108 g).
...
46,50 EUR*
Zero Tolerance Model 0777 LIMITED!
VIDEO on ZERO TOLERANCE knives (click here!) Limited Edition! Blade of Böhler N360/Devin Thomas stainless Damascus composite. Sub-frame Lock. Handle of 3-D machined carbon fiber. With clip. Blade 3 3/4”. Closed 5". Overall 8.8" Weight 4.2 oz. Zero Tolerance product information: Lightweight & sculpted, functional & tough Advanced materials and ZT engineering enable us to create the ZT that goes with your dress uniform. The 3-D sculpted handle is built of woven carbon fiber that’s stronger than steel, yet ultra-lightweight. A titanium Sub-Frame® Lock lightens and slims the handle and affords us the freedom to give the adjustable lockbar a fluid, curving shape. Of course, the ZT blade offers no compromises either. We put Böhler N360 on the cutting edge and genuine Devin Thomas stainless “herringbone” Damascus on the spine. KVT ball bearings at the pivot point and a built-in flipper ensure ultra-smooth, ultra- speedy deployment. Custom pivot hardware adds a distinctive touch.
VIDEO on ZERO TOLERANCE knives (click here!) Limited Edition! Blade of Böhler N360/Devin Thomas stainless Damascus composite. Sub-frame Lock. Handle of 3-D machined carbon fiber. With clip. Blade 3 3/4”. Closed 5". Overall 8.8" Weight 4.2 oz. Zero Tolerance product information: Lightweight & sculpted, functional & tough Advanced materials and ZT engineering enable us to create the ZT that goes with your dress uniform. The 3-D sculpted handle is built of woven carbon fiber that’s stronger than steel, yet ultra-lightweight. A titanium Sub-Frame® Lock lightens and slims the handle and affords us the freedom to give the adjustable lockbar a fluid, curving shape. Of course, the ZT blade offers no compromises either. We put Böhler N360 on the cutting edge and genuine Devin Thomas stainless “herringbone” Damascus on the spine. KVT ball bearings at the pivot point and a built-in flipper ensure ultra-smooth, ultra- speedy deployment. Custom pivot hardware adds a distinctive touch.
...
569,00 EUR*
Zero Tolerance Model 0550
VIDEO on ZERO TOLERANCE knives (click here!) Blade of S35VN stainless steel. Frame Lock. Handle of black G-10. With clip. Blade 3 1/2”. 4.625” closed. Overall 8-1/8”. Weight 5.8 oz. Zero Tolerance product information: The Zero Tolerance 0550 features a bullet-tough blade of Crucible’s S35VN stainless steel with stonewashed finish. The steel is designed to offer increased toughness over S30V, yet be easier to machine and polish. It offers high wear resistance and resists edge chipping. It’s chemistry includes niobium, vanadium and chromium carbides and offers an exceptionally uniform distribution of those carbides, too. In other words, this high-performance knife can take whatever you can dish out. Designed by Rick Hinderer.
VIDEO on ZERO TOLERANCE knives (click here!) Blade of S35VN stainless steel. Frame Lock. Handle of black G-10. With clip. Blade 3 1/2”. 4.625” closed. Overall 8-1/8”. Weight 5.8 oz. Zero Tolerance product information: The Zero Tolerance 0550 features a bullet-tough blade of Crucible’s S35VN stainless steel with stonewashed finish. The steel is designed to offer increased toughness over S30V, yet be easier to machine and polish. It offers high wear resistance and resists edge chipping. It’s chemistry includes niobium, vanadium and chromium carbides and offers an exceptionally uniform distribution of those carbides, too. In other words, this high-performance knife can take whatever you can dish out. Designed by Rick Hinderer.
...
275,00 EUR*
Zero Tolerance Model 0560
VIDEO on ZERO TOLERANCE knives (click here!) Blade of ELMAX stainless steel. Frame Lock. Handle of black 3-D machined G-10 (front) and titanium (back). With clip. Blade 3-3/4”. 5” closed. Overall 8.8". Weight 5.8 oz. Zero Tolerance product information: A NEW Hinderer & ZT Collaboration Based on Rick’s crave-worthy XM-18, the new ZT 0560 is one completely amazing knife. First, the blade. It’s pure ELMAX® powdered steel for the extreme edge retention, high strength, and toughness a hard-use knife demands. It rolls out of the handle on the KVT ball-bearing system so deployment is rapid and it’s ready when you need it. The handle is 3-D machined G-10 on the front, and equally 3-D machined titanium on the back. A framelock with lockbar stabilizer ensures a rock- solid lockup every time. To ensure this big bear of a knife carries at a comfortable weight, ZT has skeletonized the liner and machined pockets in the titanium handle and framelock. And to top it all off, the 0560 is equipped with ZT’s new deep-carry pocketclip.
VIDEO on ZERO TOLERANCE knives (click here!) Blade of ELMAX stainless steel. Frame Lock. Handle of black 3-D machined G-10 (front) and titanium (back). With clip. Blade 3-3/4”. 5” closed. Overall 8.8". Weight 5.8 oz. Zero Tolerance product information: A NEW Hinderer & ZT Collaboration Based on Rick’s crave-worthy XM-18, the new ZT 0560 is one completely amazing knife. First, the blade. It’s pure ELMAX® powdered steel for the extreme edge retention, high strength, and toughness a hard-use knife demands. It rolls out of the handle on the KVT ball-bearing system so deployment is rapid and it’s ready when you need it. The handle is 3-D machined G-10 on the front, and equally 3-D machined titanium on the back. A framelock with lockbar stabilizer ensures a rock- solid lockup every time. To ensure this big bear of a knife carries at a comfortable weight, ZT has skeletonized the liner and machined pockets in the titanium handle and framelock. And to top it all off, the 0560 is equipped with ZT’s new deep-carry pocketclip.
...
349,00 EUR*
Zero Tolerance Model 0561
VIDEO on ZERO TOLERANCE knives (click here!) Blade of ELMAX stainless steel. Frame Lock. Handle of dark earth 3-D machined G-10 (front) and titanium (back). With clip. Blade 3-3/4”. 5” closed. Overall 8.8". Weight 5.8 oz. Zero Tolerance product information: A NEW Hinderer & ZT Collaboration Based on Rick’s crave-worthy XM-18, the new ZT 0561 is one completely amazing knife. First, the blade. It’s pure ELMAX® powdered steel for the extreme edge retention, high strength, and toughness a hard-use knife demands. It rolls out of the handle on the KVT ball-bearing system so deployment is rapid and it’s ready when you need it. The handle is 3-D machined G-10 on the front, and equally 3-D machined titanium on the back. A framelock with lockbar stabilizer ensures a rock- solid lockup every time. To ensure this big bear of a knife carries at a comfortable weight, ZT has skeletonized the liner and machined pockets in the titanium handle and framelock. And to top it all off, the 0561 is equipped with ZT’s new deep-carry pocketclip.
VIDEO on ZERO TOLERANCE knives (click here!) Blade of ELMAX stainless steel. Frame Lock. Handle of dark earth 3-D machined G-10 (front) and titanium (back). With clip. Blade 3-3/4”. 5” closed. Overall 8.8". Weight 5.8 oz. Zero Tolerance product information: A NEW Hinderer & ZT Collaboration Based on Rick’s crave-worthy XM-18, the new ZT 0561 is one completely amazing knife. First, the blade. It’s pure ELMAX® powdered steel for the extreme edge retention, high strength, and toughness a hard-use knife demands. It rolls out of the handle on the KVT ball-bearing system so deployment is rapid and it’s ready when you need it. The handle is 3-D machined G-10 on the front, and equally 3-D machined titanium on the back. A framelock with lockbar stabilizer ensures a rock- solid lockup every time. To ensure this big bear of a knife carries at a comfortable weight, ZT has skeletonized the liner and machined pockets in the titanium handle and framelock. And to top it all off, the 0561 is equipped with ZT’s new deep-carry pocketclip.
...
349,00 EUR*
Kershaw BLACK GULCH WOOD
Solidly built and featuring Kershaw’s famous fit and finish, this conveniently sized folder will appeal to the classic knife enthusiast in you. It makes an ideal everyday carrying knife or a reliable work knife. Handsome hardwood inlays compliment satin-polished stainless-steel blades and handles. Blade of 8CR13MOV stainless steel. Handle of stainless steel with hardwood inlay. Leather pouch included. Blade 3”. 4-1/8” closed.
Solidly built and featuring Kershaw’s famous fit and finish, this conveniently sized folder will appeal to the classic knife enthusiast in you. It makes an ideal everyday carrying knife or a reliable work knife. Handsome hardwood inlays compliment satin-polished stainless-steel blades and handles. Blade of 8CR13MOV stainless steel. Handle of stainless steel with hardwood inlay. Leather pouch included. Blade 3”. 4-1/8” closed.
...
37,50 EUR*
Kershaw WILDCAT RIDGE WOOD
Solidly built and featuring Kershaw’s famous fit and finish, this conveniently sized folder will appeal to the classic knife enthusiast in you. It makes an ideal everyday carrying knife or a reliable work knife. Handsome hardwood inlays compliment satin-polished stainless-steel blades and handles. Blade of 8CR13MOV stainless steel. Handle of stainless steel with hardwood inlay. Leather pouch included. Blade 3-1/2”. 4-3/4” closed. Overall length 8-1/2”. Weight 7.2 oz. (204 g).
Solidly built and featuring Kershaw’s famous fit and finish, this conveniently sized folder will appeal to the classic knife enthusiast in you. It makes an ideal everyday carrying knife or a reliable work knife. Handsome hardwood inlays compliment satin-polished stainless-steel blades and handles. Blade of 8CR13MOV stainless steel. Handle of stainless steel with hardwood inlay. Leather pouch included. Blade 3-1/2”. 4-3/4” closed. Overall length 8-1/2”. Weight 7.2 oz. (204 g).
...
42,50 EUR*
Kershaw Model "Echelon"
Blade of Sandvik 14C28 stainless steel. SpeedSafe assisted opening. Handle of G-10, with clip. Blade 3-1/4”. 4” closed. Kershaw No. 1880. Kershaw product information: Designed for great looks and solid performance, the Echelon features SpeedSafe® assisted opening and opens with a thumbstud that seems to float on air—hovering in the middle of an over-sized blade cutout. To add to the airy feeling, we used natural G-10 to create a semi-translucent handle that allows you to see the operation of the SpeedSafe® mechanism inside. The Echelon also features our Inset Liner Lock and new reversible deep-carry pocketclip for discreet pocket carry. Made in the USA.
Blade of Sandvik 14C28 stainless steel. SpeedSafe assisted opening. Handle of G-10, with clip. Blade 3-1/4”. 4” closed. Kershaw No. 1880. Kershaw product information: Designed for great looks and solid performance, the Echelon features SpeedSafe® assisted opening and opens with a thumbstud that seems to float on air—hovering in the middle of an over-sized blade cutout. To add to the airy feeling, we used natural G-10 to create a semi-translucent handle that allows you to see the operation of the SpeedSafe® mechanism inside. The Echelon also features our Inset Liner Lock and new reversible deep-carry pocketclip for discreet pocket carry. Made in the USA.
...
109,00 EUR*
Kershaw BLUE MOUNTAIN - ONLY WHILE STOCKS LAST!
High-grade knife with 3” main blade and 2 1/2” sheepsfoot blade of AUS6A stainless steel. Metal handle with ABS black inlay. 4 1/8” closed. Includes nylon pouch. Kershaw No. 3130. LIMITED INVENTORY!
High-grade knife with 3” main blade and 2 1/2” sheepsfoot blade of AUS6A stainless steel. Metal handle with ABS black inlay. 4 1/8” closed. Includes nylon pouch. Kershaw No. 3130. LIMITED INVENTORY!
...
59,90 EUR*
Lensolux 3-step Remote Switch
Remote 3-step-switch for LED flashlight TLS 1500 F (Nr. 817318). Power: 30% - 60% - 100% - OFF.
Remote 3-step-switch for LED flashlight TLS 1500 F (Nr. 817318). Power: 30% - 60% - 100% - OFF.
...
19,95 EUR*
Herold Razor Strop with Clamping Fixture
Razor strop with clamping fixture. Pre-sharpening on reverse (red) side, fine-sharpening on bright leather front side. Use yellow paste (Nr. 888005) for front, red solid paste (out of set Nr. 888004) for reverse. Overall length approx. 34 cm (13 1/3"), usable length approx. 18 cm (7"), width 4 cm (1 1/2").
Razor strop with clamping fixture. Pre-sharpening on reverse (red) side, fine-sharpening on bright leather front side. Use yellow paste (Nr. 888005) for front, red solid paste (out of set Nr. 888004) for reverse. Overall length approx. 34 cm (13 1/3"), usable length approx. 18 cm (7"), width 4 cm (1 1/2").
...
43,50 EUR*